SmartyCam
Download area      Accessories      Technical specifications
Accessories
Bracket kits
SmartyCam can be installed using the following bracket kits:
Kit staffe roll-bar
V base kit (part number X90KSSMC0):
1 V base (A) + straps
1 60 mm single ball arm (B)
1 Ball head (C)
1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm
Kit staffe ventosa
Suction cup kit (part number X90KSSMC1):
1 suction cup (A) + clamp base with ball
1 60 mm single ball arm (B)
1 Ball head (C)
1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm
Staffa a culla anti-vibrazioni
Anti-vibration cot kit (part number X90KSSMCC):
Kit staffe roll-bar + staffa a culla
V base + anti-vibration cot kit (part number X90KSSMC0C):
1 V base (A) + straps
1 60 mm single ball arm (B)
1 Ball head (C)
1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm
1 anti-vibration cot (D)
Kit staffe ventosa + staffa a culla
Suction cup + anti-vibration cot kit (part number X90KSSMC1C):
1 suction cup (A) + clamp base with ball
1 60 mm single ball arm (B)
1 Ball head (C)
1 washer diameter 17.7mm, thickness 1.5mm, hole 6mm
1 anti-vibration cot (D)
Examples (V base and suction cup kit)
Esempio utilizzo 1
Use on smooth surfaces
(i.e. glass)
Esempio utilizzo 2
Use on roll-bar
Esempio utilizzo 3
Use on metal sheet
Examples of use (anti-vibration cot)
Esempio utilizzo 4
Use on smooth surfaces
(i.e. glass)
Esempio utilizzo 5
Use on roll-bar
Esempio utilizzo 6
Use on metal sheet
Nota
Note
Warning:
place the washer (2) included in the kit between SmartyCam (1) and the ball head (3).
Otherwise you could damage the camera.
© 2018 AiM Tech Srl - AiM Sportsystems - All rights reserved