|
|
|
MXP Strada |
|
The 6" colour TFT dash for road use |
|
|
|
MXP Strada is a 6" colour display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS08 Module. |
|
Click the icons and learn more:
|
|
|
|
| MXP Strada is available in two versions: |
|
 |
|
|
|
|
|
|
|
Freely configurable pages |
|
You can define all the custom pages you wish,
choosing among a wide library
of page styles, defining which data
to be shown, their end of scale and measure units.
Swapping between pages can be managed
pushing one or two pushbuttons. |
|
|
|
|
|
|
High contrast TFT display |
|
A high contrast TFT display identifies
MXP Strada at the first glance.
An ambient light sensor keeps
the backlight at optimum brightness levels. |
|
|
|
|
Flexible alarms & custom street icons |
|
MXP Strada, in its standard version, features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customized icons. |
|
|
|
|
|
|
|
| Two digital outputs |
|
MXP Strada features a LOW SIDE type
(switch to ground) digital output configurable
in order to be activated/deactivated depending
on the value of the analog/digital inputs
or on impulses coming from the ECU.
This permits to automatically run external
systems, i.e. to switch on/off additional
lights, to activate/de-activate a cooling
fan or circulation pumps, etc. when a certain
event happens. |
|
|
|
|
|
|
|
Camera inputs,
also for mirror camera |
|
Two analog camera inputs are available,
to swap your display into a mirror camera,
through pushbutton command
or event management. |
|
|
|
|
|
Integrated shift light array |
|
Choose from a host of advanced
multicoloured RGB shift light patterns
that can be customized as you like,
and for each unique gear when required. |
|
|
|
|
|
| A modular system |
|
| Using the built-in CAN bus you can add expansion modules to visualize additional info: |
|
GPS08 Module
Thanks to GPS08 Module and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique. |
|
 |
|
|
Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. |
|
 |
|
|
TC Hub
It adds 4 K thermocouples. |
|
 |
|
|
LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. |
|
 |
|
|
|
|
|
|
|
|
Connection example |
|
These are only some of the items that can be added to our MXP Strada for incrementing the performance and the data acquired: |
|
|
 |
|
|
|
|
|
With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities. |
|
|
|
|
| Race Studio 3 configuration |
|
| MXP Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need. |
|
 |
| AiM LearnFast E-training Series |
| Check out how to use Race Studio 3 Configuration: Part 1 - Part 2 |
|
|
|
|
 |
|
|
|
|
|
|
